Gas Tank Hideaway

LPG tank regulations stipulate that gas bottles must be secured to prevent them from falling and must be protected from impact and damage, especially to the valve.  Suppliers also recommend that their bottles should be protected from the weather.

The Gas Tank Hideaway enclosure gives the protection needed with our wall-mount, easy-to-install, two gas bottle slat enclosures to both hide and protect these large, industrial tanks.  You can choose one door or two based on the available opening distance.

Designed to conceal two 88 litre tanks, the Gas Tank or Hot Water Service (HWS) enclosure provides protection against impact and damage with slat sides and door/s allowing good air ventilation around the tanks.

Select either in-ground posts or bolt-down posts.  99% of people select the bolt-down base plates which bolt onto a concrete slab or pavers.  Our default base-plate post position is centre mounted (allowing 4 x 12mm holes to bolt down).  If you want off-set or corner mounted posts, you will need to specify this at the time of ordering. In-ground posts are for concreting into a 300mm wide x 400mm deep hole.  Refer to our FAQs for more information.

Adding the optional zero-gap V-joint lid provides tanks with maximum weather protection.

For commercial use, we recommend the largest size designed for 176 litre commercial LPG tanks.

Protect your tanks from damage and the weather by installing a Gas Tank or Hot Water Service Hideaway.

 

HOW DO I SELECT THE CORRECT HIDEAWAY SIZE?

If you are unsure which size you need click here.

 

Gas Tank Hideaway

LPG tank regulations stipulate that gas bottles must be secured to prevent them from falling and must be protected from impact and damage, especially to the valve.  Suppliers also recommend that their bottles should be protected from the weather.

The Gas Tank Hideaway enclosure gives the protection needed with our wall-mount, easy-to-install, two gas bottle slat enclosures to both hide and protect these large, industrial tanks.  You can choose one door or two based on the available opening distance.

Designed to conceal two 88 litre tanks, the Gas Tank or Hot Water Service (HWS) enclosure provides protection against impact and damage with slat sides and door/s allowing good air ventilation around the tanks.

Select either in-ground posts or bolt-down posts.  99% of people select the bolt-down base plates which bolt onto a concrete slab or pavers.  Our default base-plate post position is centre mounted (allowing 4 x 12mm holes to bolt down).  If you want off-set or corner mounted posts, you will need to specify this at the time of ordering. In-ground posts are for concreting into a 300mm wide x 400mm deep hole.  Refer to our FAQs for more information.

Adding the optional zero-gap V-joint lid provides tanks with maximum weather protection.

For commercial use, we recommend the largest size designed for 176 litre commercial LPG tanks.

Protect your tanks from damage and the weather by installing a Gas Tank or Hot Water Service Hideaway.

 

HOW DO I SELECT THE CORRECT HIDEAWAY SIZE?

If you are unsure which size you need click here.

Gas Tank and HWS Hideaway

FROM:

$2,100.00